Daviteq has a wide range of sensors for monitoring environments like temperature, humidity, CO2, VOC, formaldehyde, Ammonia, PM2.5, etc.

However, the basic and most common parameters for monitoring environment are:

Ambient Temperature;
Ambient Relative Humidity;

I. TEMPERATURE ONLY MONITORING

1.1 Sensor Probe ATE

To monitor the Temperature parameter only, you can select the sensor with SKU# ATE-XX, please refer to this link for its detailed specification: https://www.daviteq.com/en/?prd=_ATE_ambient-temperature-sensor-module

Note: this sensor can be only used in -35 to +70 C. For the temperature out of this range, please use another type of sensor like RTD, thermocouple, etc.

This sensor probe can be "Plugged" or "Integrated" with the "Wireless Transmitter", as below.

1.2 ATE sensor is plugged to Wireless Sub-GHz Transmitter WS433-M12F

It will be plugged via an M12 connector 4-pin with an IP67 rating.

Please refer to this link for specification of WS433-M12F: https://www.daviteq.com/en/?prd=_WS433-M12F_wireless-sensor-transmitter

1.3 ATE sensor is integrated with Sigfox device

It is integrated with the Sigfox device so that you can connect it to any Sigfox network in the World.

Please refer to this link for more details: https://daviteq.com/en/manuals/books/product-data-sheet-for-sigfox-sensors/page/sigfox-ambient-temperature-sensor-wssfc-ate

1.4 ATE sensor is integrated with LoRaWAN device

It is integrated with the LoRaWAN device so that you can connect it to any LoRaWAN Gateway on the market.

Please contact us to access this document.

1.5 ATE sensor is integrated with Modbus transmitter

It is integrated with the Modbus transmitter so that you can connect it to any device which supports the Modbus RTU protocol

Please refer to this link for more details: https://daviteq.com/en/manuals/books/product-data-sheet-for-modbus-output-sensors/page/ambient-temperature-sensor-with-modbus-output-mbrtu-ate

II. HUMIDITY AND TEMPERATURE MONITORING

2.1 Sensor probe ATH

To monitor the ambient Humidity and Temperature, you can select the sensor with SKU# ATH-XX, please refer to this link for its detailed specification: https://www.daviteq.com/en/?prd=_ATH_ambient-humidity--temperature-sensor-module

This sensor probe can be "Plugged" or "Integrated" with the "Wireless Transmitter", as below.

2.2 ATH sensor is plugged to Wireless Sub-GHz Transmitter WS433-M12F

It will be plugged via an M12 connector 4-pin with an IP67 rating.

Please refer to this link for specification of WS433-M12F: https://www.daviteq.com/en/?prd=_WS433-M12F_wireless-sensor-transmitter

2.3 ATH sensor is integrated with Wireless Sub-GHz Transmitter WS433-M12F

It becomes a single product, please refer to this link for specifications: https://www.daviteq.com/en/?prd=_WS433-ATH_wireless-integrated-humidity-sensor

2.4 ATH sensor is integrated with Sigfox device

It is integrated with the Sigfox device so that you can connect it to any Sigfox network in the World.

Please refer to this link for more details: https://www.daviteq.com/en/?prd=_WSSFC-ATH_sigfox-integrated-humidity--temperature-sensor

2.5 ATH sensor is integrated with LoRaWAN device

It is integrated with the LoRaWAN device so that you can connect it to any LoRaWAN Gateway on the market.

Please refer to this link for more details: https://www.daviteq.com/en/?prd=_WSLRW-ATH_lorawan-humidity--temperature-sensor

2.6 ATH sensor is integrated with Modbus transmitter