How to select the right iConnector - Smart IoT Gateway?
What is an iConnector?
iConnector is an out-of-box Smart IoT Gateway. It is the 3-in-1 device:
- It is a Datalogger. It logs data in its onboard Flash memory. Each record has a time-stamp. It can store up to 140.000 records;
- It is a logic controller. It can process Alarms at 04 levels LoLo, Lo, Hi, HiHi. It can also process Events like IF ... THAT ... THEN ... DO .. THIS.
- It is a Gateway to connect ModbusRTU or ModbusTCP devices to Internet!
As because it is an Out-of-box IoT gateway, users need not do any programming for it.
Just configuration (offline cable and via online Globiots platform) then it works right away!
Which iConnectors for Machine Monitoring, Equipment Monitoring, Energy Monitoring?
Index | Item code | Features | Applications |
1 | STHC-ISG02DB-NC |
3G-Dual band, 1 x RS485 port for ModbusRTU, connect up to 31 slaves with max 150 parameters (150 tags) |
Connect to any device, machine, meter, sensor... via ModbusRTU RS485! |
2 |
STHC-ISGM1-NB1-NC |
Similar to item 1, but it supports LTE cat M1, Cat NB1, and falls back to 2G (Quad-band) This version has optional GPS |
Similar to item 1, recommend using where there is no 3G network, but 4G Cat M1/Nb1 instead |
3 |
STHC-ISGM1-NB1-XA1 |
Similar to item 2, but with no internal antenna, there is an SMA connector for the external antenna. The customer must order an external antenna as a separate item. |
Similar to item 2, the iConnector will be installed inside a cabinet and an external antenna will be placed outside of the cabinet |
Which iConnectors for connecting wireless sensor WS433 to Globiots or any other IoT platform. Up to 20 sensors per one iConnector?
Index | Item code | Features | Applications |
1 | STHC-ISG02DB-WS433-CL-04 |
3G-Dual band, built-in RF receiver 433 MHz for connecting up to 20 wireless sensor WS433, NO relay, 1 x RS485 port for ModbusRTU, connect up to 31 slaves. |
For connecting wireless sensor WS433 to Globiots or any other IoT platform. Up to 20 sensors per one iConnector! |
2 | STHC-ISGWET-WS433-CL-04 |
Similar to item 1, connectivity is WiFi and Ethernet, not cellular. Users must select WiFi or Ethernet connectivity during configuration. This is to replace the 2 old items: * STHC-ISGETH-WS433-CL-04 * STHC-ISGWF/WR433-01 |
similar to item 1, but no need sim card as there is a WiFi network or LAN cable at the site. |
3 | STHC-ISGM1-NB1-WS433-CL-04 | Similar to item 1, but it supports LTE cat M1, Cat NB1, and falls back to 2G (quad-band) This version has optional GPS |
similar to item 1, recommend to use where there is no 3G network, but 4G Cat M1/Nb1 instead |
Please refer product link for more information: https://www.daviteq.com/en/?prd=iot-products-2_STHC_smart-iot-gateway---iconnector
Comments
0 comments
Please sign in to leave a comment.