For Shrimp Farm applications, there is the demand for liquid analytical sensors to measure the following parameters as below:

- pH

- Dissolved Oxygen

- Salinity

- Turbidity

- Water level

- Temperature

You can either select the sensor with Modbus RTU output or Wireless connectivity. Below is some example of select the sensors with Modbus RTU output:

pH measurement for Shrimp Farm:

Select the following parts:

* pH Sensor: H087-0020 | PH SENSOR, 0~60℃, WITH PT100 SENSOR, CABLE LENGTH 5 METERS WITH BNC CONNECTOR

* pH Transmitter with Modbus output: MBRTU-PH100-01 | PH TRANSMITTER WITH MODBUSRTU RS485 OUTPUT, 9-36VDC, M12-M CONNECTOR, BNC CONNECTOR, AND PT100 INPUT

* Femal M12 cable to use with the transmitter

Dissolved Oxygen measurement for Shrimp Farm:

Select the Dissolved oxygen sensor with optical technology:

MBRTU-PODO-02 | PROCESS OPTICAL DISSOLVED OXYGEN SENSOR IP68, MODBUSRTU RS485 OUTPUT, 12-24VDC, 6M CABLE

Salinity Measurement for Shrimp Farm:

Select the Toroidal type salinity sensor for stable measurement and not affected by residual particles:

MBRTU-LEC-K10 | LIQUID CONDUCTIVITY SALINITY SENSOR, CALIBRATED 0-70 PPT, INDUCTIVE ELECTRODE, RS485 MODBUS RTU OUTPUT, TEMPERATURE COMPENSATION, 0-65 C, 12-24VDC SUPPLY, IP68, 5M CABLE

Turbidity Measurement for Shrimp Farm:

Select the optical sensor:

MBRTU-TBD-01 | PROCESS TURBIDITY SENSOR, 0-1000NTU, IP68, RS485 MODBUSRTU OUTPUT, 12-24VDC, 5M CABLE

Water level measurement for Shrimp Farm:

Select the Ultrasonic type level sensor:

MBRTU-ULC-01 | ULTRASONIC LEVEL SENSOR FOR GENERAL LIQUID, RS485 MODBUSRTU OUTPUT, 30-600 CM RANGE, 7-48VDC, IP67

With the same above sensors, we also have the version with Wireless connectivity and battery operated:

1. Sub-GHz wireless liquid analytical sensors for Shrimp farm;
2. LoRaWAN liquid analytical sensors for Shrimp farm;
3. Sigfox-Ready liquid analytical sensors for Shrimp farm;

Please feel free to contact us should you need further information.